Skip to content
Semi Vietnam
Get a quote

Home / Materials

Materials for Semiconductor Parts and Jigs Made in Vietnam

Grades written the way a stockist here sells them, next to the ASTM and EN names your drawing may use, with a plain note on what is usually local and what has to be imported.

Metals: JIS, ASTM and EN side by side

Equivalents are close, not identical. The supply column is a typical picture, not a stock check, and the shop that quotes confirms what it can buy for your part.

MaterialJISASTM / UNSENLocal supplyUsed for
Aluminum 6061A60616061 / A96061EN AW-6061Usually stocked locallyEFEM brackets, jig plates, chamber parts
Aluminum 7075A70757075 / A97075EN AW-7075Usually stocked locallyHigh strength jig plates, never inside vacuum
Aluminum 5052A50525052 / A95052EN AW-5052Usually stocked locallyCovers, sheet metal parts
Stainless 304SUS304304 / S304001.4301Usually stocked locallyFrames, guards, brackets
Stainless 316LSUS316L316L / S316031.4404Common sizes stocked, large or special sizes importedChamber hardware, wetted parts
Stainless 440CSUS440C440C / S440041.4125Common sizes stocked, large or special sizes importedHardened pins, guides, wear parts
Carbon steel S50CS50C1050 / G10500C50, 1.0540Usually stocked locallyBase plates, holders, machine parts
Tool steel SKD11SKD11D2 / T304021.2379Usually stocked locallyChange kit parts, punches, wear plates
Tool steel SKD61SKD61H13 / T208131.2344Usually stocked locallyMold parts, hot work tooling
Bearing steel SUJ2SUJ252100 / G52986100Cr6, 1.3505Common sizes stocked, large or special sizes importedPins, rollers, precision shafts
Beryllium copperC1720C17200CuBe2, CW101CUsually importedContact parts, springs for test hardware
Titanium Grade 2 and 5Class 2, TAP6400R50400, R564003.7035, 3.7165Usually importedThermal and corrosive process parts

JIS material names are common in shops here, so a drawing that gives both names saves a round of questions. Background on the standards body: Japanese Industrial Standards. A longer comparison is in JIS against ASTM grades.

Equipment parts and line parts use different metals

The split shows in the material list before it shows anywhere else.

Plastics and composites for jigs and fixtures

Most OSAT line hardware that is not steel is one of these. Many are sold here under local trade names, so describe the material as well as naming it.

MaterialTypical use on the lineWatch for
POM (acetal)Nests, guides, low friction jig partsStable and easy to machine. Not for high temperature zones.
MC nylon (cast PA6)Rollers, guides, wear pads on handlersTakes up moisture and grows. Leave clearance on fits.
Bakelite (paper phenolic)Insulating jig plates, simple test fixturesCheap and stiff. Dusty to machine and not ESD safe unless a grade says so.
Glass mat compositeReflow carriers and wave solder palletsHolds solder temperatures. Edges may need sealing to stop fibre shedding.
FR4 and G10Test fixture plates, insulating spacersGlass fibre wears tools fast, so drilled hole quality drifts on long runs.
ESD grades of POM and PEEKParts that touch dies, packages or boardsSpecify surface resistance and the test method, not just the word ESD.
PEEK and PEISockets, nozzles, burn-in and high temperature partsUsually imported stock. Ask for the grade and the certificate.

More in POM, MC nylon and Bakelite for jigs, glass composites and FR4 for fixtures and ESD materials and coatings.

Hardened steels: typical hardness after heat treatment

Typical ranges from standard heat treatment practice. Put the range you need on the drawing, and ask for a hardness report per batch.

GradeTypical hardnessNote
SKD11HRC 58 to 62Machined soft, hardened and tempered, then ground. Size moves on hardening, so grinding stock is left.
SKD61HRC 48 to 52Tougher and less hard than SKD11. Common for mold and hot work parts.
SUS440CHRC 56 to 60The hardenable stainless for pins and guides that must not rust.
SUJ2HRC 60 to 64Bearing steel for small pins and shafts, usually ground after hardening.
S50CHRC 50 to 55 on hardened facesUsed as rolled or normalised, with induction hardening on wear faces when needed.

Heat treatment is usually bought from a specialist, which adds a step to the route. See processes.

Writing the material line for a shop here

Five things that turn a material name into something a shop can buy and you can accept.

  • Both namesJIS and ASTM or EN, for example SUS316L / ASTM 316L.
  • ConditionTemper for aluminum, hardness range for steel, annealed or not for stainless.
  • CertificateEN 10204 3.1 for the heat used, or say plainly that a stockist certificate is enough. See mill test certificates in Vietnam.
  • SubstitutionWhether a local equivalent is acceptable if your grade must be imported.
  • OriginAny restriction on country of origin. It narrows which stock a shop can buy at all.

Questions about materials

Is SUS304 the same as ASTM 304?

They are equivalent grades with chemistry limits that overlap closely but are not written identically. For most parts the difference does not matter. When it does, name the standard you release against, and a shop will buy to it or tell you it cannot.

Can a shop in Vietnam supply a mill certificate?

For grades bought from established stockists, usually yes. Ask for the certificate of the actual heat, EN 10204 3.1 or equivalent, not a stockist paper that only repeats the grade name. Certificates for cut pieces from a larger plate should still trace back to that heat.

How much time does imported material add?

It depends on the grade, the size and where it comes from. Ask the shop to show stock lead time as its own line in the quote, so you can see whether a local equivalent would change the schedule.

Which plastics are ESD safe?

Only the ESD grades, and only within the resistance range their maker states. Name the range you need, commonly the dissipative range, and the test method, for example ANSI/ESD STM11.11 for surface resistance. Plain POM, nylon and Bakelite are insulators.

Know the grade? Send the drawing.

We quote the finished parts, place the work with a partner shop that already buys that stock and reply within 24 business hours. Which buyers use which parts: industries.