Home / Certificates and documents
Certificates and Documents for Semiconductor Parts Made in Vietnam
Last reviewed 19 October 2026
A buyer who asks a Vietnamese shop for certificates and documents is asking different questions that sound alike. Is there a system? Was it checked by someone independent? Does this lot meet the drawing? May the goods cross the border at the rate the quote assumed? Each question has its own document, its own issuer and its own place to check. This page lists them, with a link to the detail page for each one. The documents prove narrow things, and none of them makes a shop an approved supplier on its own: the buyer's audit and the first article do that.
| Key fact | Practice, October 2026 |
|---|---|
| Required list for jig suppliers | None found published. Customers set their own terms in supplier codes, questionnaires and purchase orders |
| ISO 9001 | ISO 9001:2026 published 16 September 2026. Reported transition for 2015 certificates to 30 September 2029 |
| ISO 14001 | ISO 14001:2026 published April 2026. Three year transition, reported end April or May 2029 |
| Supplier code of conduct | Commonly the RBA Code, v8.0 since 1 January 2024. Assessment reports are valid two years |
| Accreditation bodies | IAF and ILAC were replaced by Global Accreditation Cooperation Incorporated on 1 January 2026 |
| What this site issues | No certificate of any kind. It does not approve shops |
Which question each document answers
Read the table by row. A certificate is often quoted for a claim it never covered, and the third column is where disputes start.
| Question | Document | What it does not show | Detail |
|---|---|---|---|
| Is there a quality system, checked by an outside body? | ISO 9001 certificate for the site and scope | That a given lot is good | Certificates semi buyers ask for |
| Is the environment handled under a permit? | Permit or registration, waste records, ISO 14001 if held | Product quality | Environmental records |
| Are working conditions checked against a code? | RBA self assessment, Pulse or VAP report | A quality system | RBA assessments |
| Are the gauges traceable? | Calibration certificates from an accredited lab | That the shop measured the lot correctly | Calibration certificates |
| Is the material what the drawing says? | Mill certificate, EN 10204 3.1 or equivalent | That this bar is the one in the part | Mill test certificates |
| Does this lot meet the drawing? | Inspection report and certificate of conformity | Other lots | Document pack by shipment type |
| Can the shop be added to a vendor list? | Buyer audit, first article, pilot lot | Anything after the audit date | AVL entry |
Who asks for what
Public documents show a pattern, not a rule. We found no buyer that publishes a certificate list for jig and fixture suppliers, so the table is our reading of what each type of buyer publishes and does.
| Buyer type | What it publishes | What a shop should expect to be asked |
|---|---|---|
| OSAT assembly and test plant | A supplier code and a quality page. One OSAT ties code compliance to supplier evaluation and keeps at least two suppliers for a material | A code questionnaire, a quality system audit, a first article and records with each lot |
| Equipment maker abroad | A supplier quality guideline. One aims for ISO 9001 in the long term and asks for inspection protocols with the delivery | An inspection plan, calibrated instruments, structured replies to complaints |
| Japanese or Korean plant in Vietnam | Drawings that cite JIS | Correct reading of JIS material and finish notes, see the shop standards pages |
| Line builder or local plant | Often only the purchase order | A certificate of conformity and the invoice set |
Where to check
- Ask for the original document, not a logo or a screenshot.
- Match the legal name, the site that will make the part and the scope line with the shop.
- Check the dates and, for ISO 9001 and ISO 14001, the edition. Both standards changed in 2026 and 2015 certificates stay valid during the transition.
- Check the issuer. For an ISO certificate that means the certification body and the accreditation body behind it. The IAF page now says that IAF stopped operating on 1 January 2026 and that Global Accreditation Cooperation Incorporated carries on its work, so the certificate database may move. A certificate that is not in the database is not proven invalid.
- For a laboratory, read the accreditation scope for the exact test. Vietnam's accreditation bureau runs a scheme called VILAS for testing and calibration laboratories.
- For an RBA report, ask the customer. Reports are shared through the RBA's own system with the customers the facility names, not published.
Market rules that travel with the goods
| Rule | What it decides | Detail |
|---|---|---|
| Origin proof | Whether a preferential duty can be claimed | EUR.1, Form VK, Form AK and CPTPP |
| HS classification | Which duty line the jig falls in | Headings 8466, 8486 and 8487 |
| Tariffs and landed cost | What the buyer pays at entry | Tariffs on machined parts in 2026 |
| Export processing enterprises | Customs and VAT treatment of zone suppliers | EPE customs and VAT |
| Dual-use export control | Whether a part, material or end use needs a licence before it leaves Vietnam | Vietnam dual-use goods check |
Standards that appear on the drawing are on the shop standards hub: aluminium grades, anodizing and plating notes. Vietnamese pages for shop owners: which certificates a machine shop needs for semiconductor orders, reading the certificate for imported SKD11 steel, RBA assessments for shops that supply OSAT plants and HS codes for jigs and fixtures.
What a shop can do before an audit
Keep originals of every certificate and permit in one folder, with expiry dates in a list. Keep time records, waste records and calibration lists for 12 months. Say plainly which certificates the shop does not hold and show the documented controls it does have. A shop that claims a certificate it does not hold ends a qualification faster than one that has none. The supplier side is on the qualification page.
This site does not issue or hold certificates. Ask the shop for the original and check it with the issuer. When the drawing is ready, send the RFQ with the document set stated, and the reply comes within 24 business hours.
Frequently asked questions
Which certificate does a semiconductor buyer require from a Vietnamese machine shop?
No buyer we found publishes one required list for jig suppliers. Public documents mention ISO 9001 as the system a long-term relationship aims for, other ISO management systems as longer-term goals and a supplier code of conduct, usually the RBA Code, as a prerequisite for evaluation. What your buyer requires is set in its supplier terms, so ask its supplier quality engineer.
Is ISO 9001:2015 still valid?
Yes, during the transition. ISO published ISO 9001:2026 on 16 September 2026 and organisations certified to the 2015 edition have a reported transition to 30 September 2029. ISO 14001:2026 was published in April 2026 with a three year transition. Confirm the dates with the certification body.
How does a buyer check that a certificate is real?
By asking for the original, matching the legal name, site and scope to the shop, then checking the issuer. The IAF CertSearch database held accredited certificates, and IAF and ILAC were replaced by Global Accreditation Cooperation Incorporated on 1 January 2026, so check where the database now lives. A certificate missing from it is not proven invalid.
Does this site certify or approve shops?
No. This site does not issue or hold certificates and does not approve suppliers. It quotes the finished parts and asks at most three partner shops to price each one. Ask the shop for the original certificate and check it with the issuer.
Sources
- ASE, supply chain management framework (supplier code of conduct is a prerequisite for evaluation and purchasing decisions)
- Amkor, quality management (supplier audits and the certificates held by Amkor Vietnam)
- Semsysco, Quality Assurance Guidelines TE_0030 revision 03, hosted by Lam Research (ISO 9001 aimed for, ISO 14001 and ISO 45001 in the long term, inspection report fields, ten year retention)
- LRQA, ISO 9001:2026 is live (published 16 September 2026, transition to 30 September 2029)
- ANSI National Accreditation Board, ISO 14001:2026 key changes (published 15 April 2026)
- International Accreditation Forum, home page (IAF stopped operating on 1 January 2026, Global Accreditation Cooperation Incorporated began full operations)
- Responsible Business Alliance, VAP Standard V8.1, September 2026 (report validity two years)
- Bureau of Accreditation Vietnam, VILAS (laboratory accreditation scheme)
Last reviewed 19 October 2026. Figures are typical values, confirm them with the supplier and the current standard. This site does not issue or hold certificates.
Need a quote for this part?
Send the drawing. We quote the finished parts, place the work with a partner shop in Vietnam and reply within 24 business hours.
Get a quote