Home / Shop standards
Standards Named on Semiconductor Jig Drawings From Japan and Korea
Last reviewed 19 October 2026
Drawings that come from a Japanese or Korean plant, or from a Japanese owned plant in Vietnam, name materials, finishes and tolerances in JIS. A Vietnamese shop that reads them correctly quotes the right part, and one that does not quotes a different one. This page lists the notes that appear most often on jig and tooling drawings, the JIS standard behind each and the page that explains it. The list is a guide to reading, not a copy of the standards, which the Japanese Standards Association sells.
| Drawing note | Standard behind it | Question to settle before the quote | Detail |
|---|---|---|---|
| A5052, A6061, A7075 plate, bar or extrusion | JIS H 4000 (plate), H 4040 (bar), H 4100 (extrusion) | Temper, product form and the standard the certificate cites | JIS H 4000 aluminium grades |
| Anodize, hard anodize, plating, chromate | JIS H 8601, H 8603, H 8615, H 8617, H 8625 | Edition, thickness, whether size is before or after coating, masking | JIS surface treatment notes |
| SUS304, S45C, SKD11 and other steel grades | JIS G series | Nearest ASTM or EN grade and the certificate type | JIS and ASTM material grades |
| General tolerance class f, m, c or v | JIS B 0405 | Which class applies when none is written | Japanese and Korean drawings. Vietnamese: dung sai chung JIS B 0405 |
| Surface roughness symbols | JIS B 0601 and ISO 1302 | Which symbol system and which parameter | Surface finish guide |
| Datums and geometric tolerances | JIS B 0021, ISO 1101, ASME Y14.5 | Which system defines the datum frame | ASME Y14.5 against ISO GPS |
| "ESD safe" packing on parts that carry or touch devices | ANSI/ESD S541, with S20.20 for the programme | Which property, which test and which edition the customer means | ESD packaging S541 |
| Hardness callouts on tool steel | JIS Z 2245 and related methods | Scale, where to measure, after which heat treatment | Tool steel heat treatment |
How to use the list
- Find each note on the drawing in the first column and write down the standard and the edition.
- Where the drawing gives no year, ask the buyer which edition it means.
- Ask the shop to restate the material, temper, finish and tolerance notes in its quote.
- Put accepted equivalents on the drawing by name, for example ASTM B209 for plate.
- Put the certificate type and the standard it must cite on the order. The set of documents that travels with the lot is on the certificates and documents hub.
Editions have moved
The Japanese Standards Association lists JIS H 4000:2022, JIS H 4040:2023, JIS H 4100:2022, and JIS H 8601 and H 8602 revised in December 2025 with English editions in March 2026. A drawing made before those dates may cite an older edition. The older edition is not wrong, but a certificate to a different edition than the drawing is a different promise, so the edition belongs on the order.
Vietnamese pages for shop owners: ESD for jig shops and surface resistance tests and ESD and clean packing for parts sent to a fab.
This site does not issue or hold certificates and does not approve suppliers. When the drawing is ready, send the RFQ with the standards listed and the reply comes within 24 business hours.
Frequently asked questions
Do Vietnamese shops read JIS drawings?
Many shops that supply Japanese or Korean plants do, but we found no public count. The practical test is to ask the shop to restate the material, temper, finish and general tolerance notes in its quote, so that a misreading shows before the cutting starts.
Which edition of a JIS standard applies?
The one the drawing names. If the drawing gives no year, ask the buyer in writing. Several JIS standards for aluminium and anodizing were revised in 2022, 2023 and 2025.
Can I write ASTM or ISO grades on a JIS drawing?
Yes, as accepted equivalents, if you name them. Nearest is not identical, so state which standards the certificate may cite.
Sources
- Japanese Standards Association, JIS H 4000:2022 English preview
- Japanese Standards Association, JIS H 8601:2025 English preview
Last reviewed 19 October 2026. Figures are typical values, confirm them with the supplier and the current standard. This site does not issue or hold certificates.
Need a quote for this part?
Send the drawing. We quote the finished parts, place the work with a partner shop in Vietnam and reply within 24 business hours.
Get a quote